How Do I Change My Belkin Router Settings?

How do I change my Belkin router name and password?

How to Change the Name of a Network SSID on a BelkinOpen a Web browser.Type “192.168.

2.1″ without quotes into the address bar, then press “Enter.”Click “Login,” then “Submit.”Click “Channel and SSID.” Type a wireless network name into the “SSID” box, then click “Apply Changes” to save and apply the settings.

Writer Bio..

How do I switch from 2.4 GHz to 5GHz?

The frequency band is changed directly on the router:Enter the IP address 192.168. 0.1 in your Internet browser.Leave the user field empty and use admin as the password.Select Wireless from the menu.In the 802.11 band selection field, you can select 2.4 GHz or 5 GHz.Click on Apply to save the Settings.

How do I reset a Belkin router password?

Locate the reset button on the back of your Belkin router if you cannot log in to the dashboard at all. Press and hold the button for 15 seconds. This will reset your admin and Wi-Fi password and all router settings, so you will have to log in to the dashboard and customize settings to your needs.

How do I reset a Belkin router?

Look for the Reset button of your router. While the router is powered ON, press and hold the Reset button for 15 seconds. Step 2: Wait for at least one minute for the router to restart.

How do I connect my Belkin router to my modem?

Connect the modem to your Belkin router using an Ethernet cable. The Ethernet cable must be plugged into an open Ethernet port on your modem, and into the port on your Belkin router labeled “WAN / Internet.” Reconnect your Internet modem to its power supply. Plug in the Belkin router to its power supply.

How do I access my Belkin router settings?

General Belkin Router ConfigurationVisit the router’s IP address (http://192.168.2.1) in a new browser window. http://192.168.2.1 is the default Belkin router IP address.Click on DNS under Internet WAN.Enter the router’s password and click Submit.

Long story short, we are using 192.168. X.X IP addresses because this is best practice. The IETF has created three IP ranges for private networks, with Class C being the smallest and easiest to control and maintain. This is why most routers use exactly this IP range.

How do I change my Internet settings?

Complete These Steps:Select “System Settings” from the HOME Menu.Select “Internet” and then “Internet Settings”. … Select the connection you wish to edit, located under “Registered Networks”.Select “Change Settings.”Select from the following options, and enter the appropriate network information:More items…•

How do I reset my router password?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

How do I find the password for my router?

See Wi-Fi Password on Android If you’re lucky enough to be running Android 10, it’s easily accessible: just head to Settings > Network & Internet > Wi-Fi and select the network in question. (If you aren’t currently connected, you’ll need to tap Saved Networks to see other networks you’ve connected to in the past.)

Can’t connect to Belkin router?

Troubleshooting internet connection problem with your routerUnplug the modem, the router and the computer (in that order) from their respective power outlets then wait for 30 seconds before plugging them back. … Check physical connections, cables and lights on the router. … Check some factors that affect wireless clients, such as:More items…

What is the default password for Belkin router?

Not all Belkin routers use the same login information so you might have to try a few before you can get in. Try these: Default usernames: admin, Admin, [blank] Default passwords: admin, password, [blank]

How do I test my Belkin wireless router?

Checking your Belkin router’s WAN IP addressLaunch a web browser like Internet Explorer or Mozilla Firefox. Then enter your router’s IP address.On the Router Setup page, enter your router’s administrator Password.On the Internet Settings page, look for WAN IP address.

How do I change my router name and password?

To change your WiFi password or network name:Launch a web browser from a computer or mobile device that is connected to your router’s network.Enter www.routerlogin.net. … Enter the router admin user name and password. … Select Settings > Wireless Setup.Enter your new network name in the Name (SSID) field.More items…•

How do I change my Belkin router from 2.4 GHz to 5GHz?

How to Use the 5-GHz Band on Your RouterLog into your account. Open your browser and enter the manufacturer’s default IP address, typically located on the underside of your router or in the user manual or a custom one that you set. … Open the Wireless tab to edit your wireless settings. … Change the 802.11 band from 2.4-GHz to 5-GHz.Click Apply.

Why can’t I log into my Belkin router?

Make sure that the ethernet cable (RJ45) connecting your Belkin router and computer is not busted. If you are still unable to access the router’s web-based setup page, try using another ethernet cable. NOTE: If you are accessing 192.168. 2.1 via wireless connection, make sure that you are connected to your own Wi-Fi.

How do I know if I have 2.4 GHz or 5GHz?

From your smartphone’s Wireless settings page, look at the names of your Wi-Fi networks.A 2.4 GHz network may have “24G,” “2.4,” or “24” appended to the end of the network name. For example: “Myhomenetwork2.4″A 5 GHz network may have “5G” or “5” appended to the end of the network name, for example “Myhomenetwork5”

How do I speed up my Belkin router?

Step by step: Tweaking your router’s settingsType the router’s IP address into your browser to launch the configuration interface. … Channel bonding can significantly increase your router’s wireless performance. … Belkin routers refer to channel-width settings simply as Bandwidth. … Check to make sure WMM is enabled.More items…•

How do you access your router settings?

Complete these steps:Open a web browser such as Internet Explorer.Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168. … A new window prompts for a User name and Password.

How do I know if my router is working properly?

To test if your router is working, try to ping one computer using another computer in the same network. You should be able to do this if the router is working properly. Your computer’s firewall must be disabled as well. To learn more on how to check the computer’s connectivity with the router, click here.

How do I change my wifi router settings?

How to Change Your Router’s Login InformationEnter your router’s IP address into your favorite web browser.Log in with the default username and password (both admin, usually).Go to settings.Select Change Router Password or a similar option.Enter the new password.Save the new settings.